Three scenarios dominate the claims data. First, a compromised vendor email chain leads your AP team to redirect a legitimate invoice payment to a new bank account controlled by a criminal. Second, a spoofed executive email instructs your controller to wire funds for a confidential acquisition or urgent tax payment. Third, a threat actor compromises your company's own email system and intercepts outbound payment instructions to your clients, redirecting incoming payments. Each scenario triggers a different coverage grant, and some policies cover only one or two of the three.
Common Wire Transfer Loss Scenarios
A ransomware attack that locks out a municipal water treatment plant's programmable logic controllers is not the same event as a phished employee clicking a bad link in an office email. The policy form that responds to one may not respond to the other. Utility operators, whether running a regional electric cooperative, a gas distribution network, or a wastewater authority, face a class of cyber risk that standard commercial policies were never designed to address. Operational technology environments, SCADA systems, and third-party control system vendors introduce exposures that sit outside the assumptions baked into most cyber liability forms. Premiums across the cyber insurance market are projected to rise 15 to 20 percent in 2026, and underwriters are asking harder questions about OT segmentation, incident response plans, and compliance posture before they will quote. If you operate critical infrastructure, understanding how cyber coverage for utilities actually works, from SCADA attack response to federal reporting obligations, is no longer optional. It is a prerequisite for binding a policy that will perform under stress.
Understanding Cyber Insurance for Utility Infrastructure
Utility cyber insurance is not a product you pull off a shelf. It is a coverage structure assembled from insuring agreements, endorsements, and sublimits that must align with the specific way your organization generates, transmits, or distributes energy, water, or gas. A 50-employee rural electric cooperative and a 400-employee investor-owned gas utility face different threat profiles, different regulatory frameworks, and different business interruption calculations. The policy form has to reflect those differences at the coverage-grant level, not just in the declarations page.
Most commercial cyber policies were written with IT environments in mind: servers, databases, cloud platforms, email systems. Utility operators live in a world where a compromised human-machine interface can open a valve, trip a breaker, or shut down a generating unit. The gap between what a standard cyber form covers and what a utility actually needs is where claims get denied.
Bridging the Gap Between IT and Operational Technology (OT)
IT networks and OT networks serve fundamentally different purposes. Your IT environment processes data. Your OT environment controls physical processes: voltage regulation, chemical dosing, turbine speed, pressure management. When a cyber event crosses from IT into OT, the consequences shift from data loss to physical damage, safety hazards, and service interruption affecting thousands of customers.
A policy form that defines "computer system" narrowly may exclude programmable logic controllers, remote terminal units, and distributed control systems entirely. You need to verify that the definition of covered systems in your policy explicitly encompasses OT assets, including legacy equipment running outdated firmware. This is exactly the type of form-level review that an agency like Bloc Cyber performs before binding: reading the insuring agreements line by line to confirm that your SCADA environment is not silently excluded.
SCADA Vulnerabilities and Industrial Control Systems
SCADA systems remain high-value targets. Iranian-affiliated threat actors have expanded their targeting of Siemens and Schneider Electric PLCs, and CISA has issued multiple advisories warning critical infrastructure operators about active exploitation campaigns. Rockwell Automation PLCs have also been flagged for removal from public-facing networks due to persistent vulnerabilities.
These are not theoretical risks. A compromised PLC can alter process variables without triggering alarms, and the forensic cost of investigating an OT intrusion is substantially higher than a conventional IT breach. Your cyber policy needs to cover OT-specific forensics, not just standard digital forensics performed on Windows servers.
By: Caden Braly
Founder of Bloc Cyber Insurance
INDEX
Bloc Cyber and Its Licensed Producers Are Authorized to Place Cyber Coverage in All 50 U.S. States and The District of Columbia.
Cyber liability insurance covers the financial losses your business faces after a cyberattack or data breach. This page explains what the coverage includes, who needs it, what it costs, and how Bloc Cyber helps you get protected fast.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
Forensic Investigations: Identifying the Source and Scope
Forensic investigators determine how the attacker got in, what data was accessed, whether exfiltration occurred, and whether the threat actor is still present in the network. Their report drives every downstream decision: which individuals must be notified, whether payment card brands must be alerted, and what remediation steps are necessary. Forensic engagements for mid-market companies commonly run between $30,000 and $150,000, depending on the complexity of the environment. The policy form may impose a separate sublimit on forensic costs or bundle them under a single breach response aggregate. Bloc Cyber reviews these sublimits at the insuring-agreement level before binding, so clients understand exactly how much forensic coverage they are purchasing and where the cap sits relative to their actual exposure.
Core Coverage Components for Energy and Water Providers
Utility-specific cyber coverage typically includes several insuring agreements that go beyond what a standard commercial cyber form provides. First-party coverage should address incident response costs, data restoration, and crisis communications. Third-party coverage should address regulatory defense, liability to affected customers, and claims arising from service interruption. The critical additions for utilities are business interruption tied to physical operations and coverage for failures originating in third-party control system vendors.
Grid and Plant Downtime: Business Interruption Limits
Business interruption coverage in a utility cyber policy works differently than in a retail or professional services context. Your lost revenue is not measured by website downtime or inability to process invoices. It is measured by megawatt-hours not delivered, gallons not treated, or therms not distributed. The waiting period, the period of restoration definition, and the sublimit all matter enormously.
A well-structured business interruption provision should account for the time required to safely restore OT systems, which often takes far longer than rebooting an IT server. Some forms impose 8- or 12-hour waiting periods that may not align with the actual timeline of a grid restoration event. You should negotiate the waiting period and confirm that the period of restoration extends until systems are fully operational, not merely until data is recovered.
Third-Party Control System and Supply Chain Liability
Your SCADA environment likely depends on software and firmware from vendors you did not build and do not fully control. Supply chain attacks have increased dramatically, and a compromised vendor update can propagate through your control systems before your security team detects it. The Kaseya-style attack vector, where a trusted vendor's platform becomes the delivery mechanism for malware, applies directly to industrial control system vendors.
Your policy form should address contingent business interruption: losses you suffer because a vendor's system fails or is compromised. Many standard cyber forms either exclude this coverage entirely or bury it under a sublimit so low it is functionally useless. Review the vendor-related exclusions and sublimits carefully before binding.
The gap between a basic crime policy and a comprehensive fraud protection program is significant. The table below highlights key differences.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
This comparison illustrates why a general liability policy, even one with a broad "personal and advertising injury" grant, will not respond to a regulatory proceeding. The coverage must be placed specifically under a cyber or technology E&O form that includes regulatory defense as a named insuring agreement.
| Coverage Feature | Basic Crime Policy | Comprehensive Cyber with Fraud Coverage |
|---|---|---|
| Computer Fraud | Typically included | Included |
| Social Engineering | Optional endorsement, low sublimit | Included, higher sublimits available |
| Push Payment Fraud | Often excluded | May be covered as separate grant |
| Account Takeover | May fall under computer fraud | Explicitly covered |
| Forensic Investigation | Not covered | First-party expense coverage |
| Legal and Regulatory Costs | Not covered | Included |
| Callback Verification Required | Yes, strict condition | Yes, but terms vary by form |
| Typical Sublimit Range | $100K - $250K | $250K - $1M+ |
R&W retentions function similarly to a deductible but are typically structured as a percentage of enterprise value. A common retention for mid-market deals sits between 1% and 3% of the transaction value. On a $50 million deal, that means the buyer absorbs the first $500,000 to $1.5 million of covered losses before the insurer pays anything. The retention exists because underwriters expect the buyer's own diligence to catch smaller issues. Retention levels are negotiable and vary by carrier, deal size, and the quality of the diligence package presented during underwriting.
How Retention Works as a Deductible
The Transition from Retention to Drop-Down Coverage
Most R&W policies include a drop-down feature that reduces the retention, often by half, after a specified period, typically 12 months post-closing. If the original retention is $1 million, it drops to $500,000 after the first year. This mechanism reflects the assumption that the most significant breaches surface early. The reduced retention in the later period provides the buyer with more accessible coverage for claims that emerge after the initial post-closing adjustment period. Some policies offer a full drop to zero retention after 18 or 24 months, though this depends on the specific terms negotiated with the underwriter.
Comparison: Standard Cyber vs. Utility-Specific Policies
The differences between a general commercial cyber policy and one structured for utility operations are not cosmetic. They affect whether a claim gets paid.
Coverage Comparison Table
| Coverage Area | Standard Commercial Cyber | Utility-Specific Cyber |
|---|---|---|
| Covered Systems | IT servers, cloud, endpoints | IT, OT, SCADA, PLCs, RTUs, DCS |
| Business Interruption Trigger | Network outage, data loss | Physical process disruption, grid/plant downtime |
| Waiting Period | Typically 6-12 hours | Negotiable; should reflect OT restoration timelines |
| Third-Party Vendor Failure | Often excluded or sublimited | Contingent BI for control system vendor compromise |
| Regulatory Coverage | State breach notification defense | Federal CIRCIA compliance, state PUC proceedings |
| Forensics Scope | Standard IT forensics | OT-specific forensics, ICS incident reconstruction |
| Bodily Injury / Property Damage | Typically excluded | May be endorsed for OT-caused physical events |
| Reporting Obligations Support | Limited | CISA reporting, sector-specific ISAC coordination |
This table is not exhaustive, but it highlights the areas where a standard form will leave you exposed. An agency focused exclusively on cyber and technology liability, like Bloc Cyber, can walk you through each of these gaps using your actual policy language rather than generic marketing summaries.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
Critical Infrastructure Reporting Duties and Regulations
Federal and state reporting obligations for critical infrastructure operators have tightened significantly. Failing to comply does not just create regulatory risk; it can void coverage under a cyber policy that conditions payment on timely notification.
CIRCIA Requirements and Federal Compliance
The Cyber Incident Reporting for Critical Infrastructure Act requires covered entities to report substantial cyber incidents to CISA within defined timelines. Ransomware payments carry their own separate reporting window. CISA's updated advisories for critical infrastructure make clear that the agency expects operators to maintain both detection capability and reporting readiness.
Your cyber policy should cover the legal costs of preparing and submitting these reports. Some forms treat regulatory compliance costs as part of the incident response sublimit; others carve them out separately. The distinction matters when you are simultaneously paying for forensics, legal counsel, public relations, and federal reporting within the same event.
Post-Incident Forensic and Legal Obligations
After a SCADA or OT intrusion, you will likely face parallel investigations: your own internal forensic team, your insurer's panel forensics firm, CISA, and potentially your state public utility commission. A coordinated attack on Minnesota water utilities demonstrated how quickly a regional incident can trigger multi-agency scrutiny.
Your policy should not restrict your choice of forensic investigators to a panel that lacks OT expertise. If the form requires you to use a pre-approved vendor, confirm that vendor has ICS forensic capability. The wrong forensic team can miss artifacts specific to industrial protocols like Modbus or DNP3, leaving you with an incomplete investigation and a disputed claim.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
FAQ: Does my general business insurance cover hacking?
Almost certainly not. Standard CGL and BOP policies contain electronic data exclusions. Even if your policy has a small "data breach" endorsement, it is typically capped at $50,000 to $100,000, which will not cover a meaningful incident. A standalone cyber liability form provides the breadth and limits required for a real claim.
FAQ: How does a consent order affect my future premiums?
A consent order signals increased risk to underwriters. Expect premium increases at renewal, potentially 25 to 100 percent or more depending on the severity of the order and your compliance track record. Some carriers may decline to renew entirely if the consent order reveals systemic compliance failures.
Law firm cyber coverage is not a commodity product you can purchase by checking a box on a general liability application. The risks are specific: trust account fraud, privileged document exposure, deal data theft, multi-state notification obligations, and business interruption measured in lost billable hours. Your policy needs to reflect those risks at the insuring-agreement level, with sub-limits and retentions that match your actual exposure.
Do not wait for a breach to discover that your social engineering sub-limit is $100,000 on a $1.2 million wire or that your business-interruption waiting period is 24 hours when your systems were down for a week. If you are purchasing your first cyber policy or renewing an existing one, have a specialist review the actual policy form with you. Bloc Cyber's practice is built entirely around cyber, technology E&O, and AI liability placement. You can
request a coverage review to have a specialist walk through the insuring agreements, sub-limits, and exclusions specific to your firm's risk profile before you bind.
Common Questions About Utility Cyber Coverage
FAQ: Conversational Answers for New Policyholders
Does my general liability policy cover a cyberattack on our SCADA system? Almost certainly not. General liability forms typically exclude cyber events, and even if they did not, they would not cover the OT-specific forensic, business interruption, and regulatory costs that follow a SCADA compromise.
What happens if a vendor's software update causes our control systems to fail? That is a contingent business interruption event. Your cyber policy may respond, but only if it includes contingent BI coverage and the vendor relationship falls within the policy's definition of covered third-party service providers.
Are we required to report a ransomware attack to the federal government? Yes, under CIRCIA, if you are a covered critical infrastructure entity. Ransomware payments have their own reporting timeline. Your policy should cover the legal costs of compliance.
Will our cyber policy pay for physical damage caused by a compromised PLC? Standard cyber forms exclude bodily injury and property damage. Some utility-specific forms can be endorsed to cover physical consequences of a cyber event, but this must be negotiated before binding.
How long does OT system restoration typically take after a major incident? Weeks, not days. Unlike IT systems that can be reimaged quickly, OT environments require careful validation before reconnection to prevent unsafe operating conditions. Your business interruption period of restoration should reflect this reality.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
Post-Incident Forensic and Legal Obligations
After a SCADA or OT intrusion, you will likely face parallel investigations: your own internal forensic team, your insurer's panel forensics firm, CISA, and potentially your state public utility commission. A coordinated attack on Minnesota water utilities demonstrated how quickly a regional incident can trigger multi-agency scrutiny.
Your policy should not restrict your choice of forensic investigators to a panel that lacks OT expertise. If the form requires you to use a pre-approved vendor, confirm that vendor has ICS forensic capability. The wrong forensic team can miss artifacts specific to industrial protocols like Modbus or DNP3, leaving you with an incomplete investigation and a disputed claim.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
Before You Buy a Policy
Utility cyber coverage is not something you can evaluate from a quote comparison spreadsheet. The differences that matter are buried in definitions, exclusions, sublimits, and waiting periods that only become visible when you read the actual policy form. A policy that appears adequate on a summary page may contain a "computer system" definition that excludes your entire OT environment, or a business interruption waiting period that does not start counting until after you have already lost six figures in downtime.
The single most valuable step you can take before purchasing or renewing a utility cyber policy is to have the form reviewed by someone who reads these documents for a living. Bloc Cyber's practice is built around exactly this: reviewing insuring agreements, endorsements, and sublimits before binding so you understand what triggers coverage and where the gaps sit. If you operate critical infrastructure and want a specialist to review your policy form before your next renewal, that conversation costs nothing and may prevent a six- or seven-figure surprise at claim time.
ABOUT THE AUTHOR
Caden Braly
— Founder, Bloc Cyber
I'm Caden Braly, founder of Bloc Cyber, the specialty cyber insurance arm of Braly Insurance. I built Bloc Cyber around one idea: businesses deserve coverage that actually responds when a cyberattack happens. I work closely with clients to understand their exposure, place the right policy through specialty carriers, and stand with them through the claim. My goal is simple — give every business straight answers and protection they can trust.
Full profile → caden@bloccyber.com LinkedIn
Industries We Protect
Cyber Coverage Built for Your Industry
Every industry faces a different cyber threat, from patient records in healthcare to wire fraud in construction. Bloc Cyber matches coverage to the risks your sector actually faces, drawing on specialty carriers that understand your business. Find your industry below to see how we protect it.
Healthcare
Banking
Retail / E-Commerce
Legal
Technology / SaaS
Education
Energy / Utilities
Manufacturing
Construction
Defense
Healthcare
HIPAA-grade protection for patient data
725
healthcare breaches disclosed in 2024
HIPAA-grade protection for patient data
▣ Ransomware on EHR systems
▣ PHI exfiltration
▣ Medical device exploits
▣ Business email compromise
Sub-sectors we place
Hospitals and health systems
Physician practices and specialty clinics
Dental practices and DSOs
Behavioral health and addiction treatment centers
Medical billing and revenue cycle management firms
Typical turnaround for indication of terms: 1 business day.
Banking
Coverage that meets FFIEC and NYDFS expectations
$5.9M
average cost of a financial sector breach
Common threats we underwrite against
▣ Wire fraud and BEC
▣ Credential stuffing
▣ Third-party vendor risk
▣ Ransomware
Sub-sectors we place
Community banks
Credit unions
Mortgage lenders and loan originators
Wealth management and RIAs
Payment processors and merchant acquirers
Typical turnaround for indication of terms: 1 business day.
Retail / E-Commerce
PCI-DSS aligned coverage for every checkout
42%
of retailers hit by ransomware in the last year
Common threats we underwrite against
▣ Magecart / card skimming
▣ POS malware
▣ Account takeover
▣ Supply-chain intrusion
Sub-sectors we place
Direct-to-consumer (DTC) brands
Shopify and marketplace sellers
Brick-and-mortar multi-location retailers
Restaurants and QSR franchises
Grocery and specialty food retail
Typical turnaround for indication of terms: 1 business day.
Legal
Privilege, client files, and trust-account safeguards
1 in 4
law firms reported a breach in 2024
Common threats we underwrite against
▣ Wire-transfer fraud
▣ Privileged data theft
▣ Email account compromise
▣ Ransomware
Sub-sectors we place
AmLaw / large firms
Boutique litigation firms
Personal injury and plaintiffs’ firms
Estate planning and trust attorneys
Title and real estate closing firms
Typical turnaround for indication of terms: 1 business day.
Technology / SaaS
SOC 2 and ISO-aligned risk transfer
$4.88M
avg. cost of a SaaS breach in 2024
Common threats we underwrite against
▣ Supply-chain attacks
▣ Cloud misconfiguration
▣ Token and key theft
▣ Zero-day exploits
Sub-sectors we place
B2B SaaS platforms
Managed service providers (MSPs) and MSSPs
Fintech startups
AI and machine learning companies
Cloud hosting and infrastructure providers
Typical turnaround for indication of terms: 1 business day.
Education
FERPA-aligned coverage for student and research data
80%
of K–12 districts hit by ransomware since 2022
Common threats we underwrite against
▣ Ransomware on district networks
▣ Student PII theft
▣ Fake invoice fraud
▣ DDoS on exam platforms
Sub-sectors we place
K-12 public school districts
Private and charter schools
Colleges and universities
EdTech platforms
Tutoring, test prep, and online learning providers
Typical turnaround for indication of terms: 1 business day.
Energy / Utilities
OT and IT coverage for critical infrastructure
24/7
operational-tech monitoring requirements
Common threats we underwrite against
▣ ICS/SCADA intrusion
▣ Nation-state actors
▣ Ransomware on OT
▣ Insider threat
Sub-sectors we place
Municipal utilities (water, electric, gas)
Oil and gas operators
Pipeline and midstream companies
Renewable energy (solar, wind) developers
Electric cooperatives and rural utilities
Typical turnaround for indication of terms: 1 business day.
Manufacturing
Business interruption protection for connected plants
25%
of all ransomware attacks target manufacturing
Common threats we underwrite against
▣ Ransomware halting production
▣ IP theft
▣ ICS exploits
▣ Vendor compromise
Sub-sectors we place
Industrial and heavy equipment manufacturers
Food and beverage processing
Pharmaceutical and medical device manufacturers
Automotive and parts suppliers
Aerospace component manufacturers
Typical turnaround for indication of terms: 1 business day.
Construction
Protection for project files, wires, and jobsite tech
$200K+
average wire-fraud loss in construction
Common threats we underwrite against
▣ Wire-transfer diversion
▣ BEC on project payments
▣ Stolen bid data
▣ Ransomware
Sub-sectors we place
General contractors
Commercial HVAC, electrical, and plumbing subs
Civil and infrastructure contractors
Homebuilders and residential developers
Architecture and engineering (A&E) firms
Typical turnaround for indication of terms: 1 business day.
Defense
CMMC, DFARS, and CUI-compliant risk transfer
CMMC
2.0 compliance required by 2026
Common threats we underwrite against
▣ CUI exfiltration
▣ Nation-state APTs
▣ Supply-chain compromise
▣ Cleared-personnel targeting
Sub-sectors we place
DoD prime contractors
CMMC-regulated subcontractors
Defense software and systems integrators
Aerospace and satellite contractors
Federal IT and cleared staffing firms
Typical turnaround for indication of terms: 1 business day.
The Bloc system
One foundation.
Ten industry-specific builds.
The Bloc mark is built from stackable planes — each one a different angle on the same core structure. That’s how we place coverage: one underwriting discipline, tuned and re-tuned for every industry we serve.
Coverage
A policy you can actually read.
Structured in three clean blocs.
01
First-Party
Your direct losses when an incident hits your business.
✓
Incident response & forensics
✓
Business interruption
✓ Data restoration
✓ Cyber extortion / ransomware
✓ Funds transfer fraud
✓ Reputational harm
02
Third-Party
Your liability to clients, partners, and regulators.
✓
Network security liability
✓
Privacy liability (HIPAA, GDPR, state laws)
✓ Regulatory defense & fines
✓ PCI-DSS fines and assessments
✓ Media liability
✓ Breach notification costs
03
Specialty
Advanced coverages for complex risks and contracts.
✓
Technology E&O
✓
Social engineering fraud
✓ Contingent business interruption
✓ Systems failure
✓ Bricking & hardware replacement
✓ CMMC / regulatory-specific endorsements
Typical limits placed
$1M / $1M starter
$5M / $10M mid-market
$25M+ layered towers
Custom retentions
Common Questions
Cyber Liability Insurance, Explained
What does cyber insurance cover?
Cyber insurance covers the financial losses from a data breach or cyberattack. This includes breach response, legal fees, customer notification, ransomware, business interruption, and regulatory fines, depending on your policy.
Does my business really need cyber insurance?
Yes. Any business that stores customer data, processes payments, or relies on connected systems faces cyber risk. Small and mid-sized companies are frequent targets because they often have fewer defenses.
How much does cyber insurance cost?
Cost depends on your industry, revenue, data volume, and security practices. We market your risk to multiple carriers to find strong coverage at a competitive price. Request a quote for an exact figure.
What is the difference between first-party and third-party cyber coverage?
First-party coverage pays for your own losses, like data recovery and lost income. Third-party coverage pays for claims from others harmed by a breach on your systems.
How fast can I get a quote?
Most clients receive a quote in under 24 hours after we review the details of their business and exposure.
What should I do first after a cyberattack?
Contact us right away. We help you start breach response, connect you with forensic and legal support, and guide your claim so you contain the damage quickly.
Insights
Field notes from the placement desk.
What carriers are asking right now.
Start a quote
Tell us about your business.
We’ll come back with terms.
We’ll review your stack, your contracts, and your exposure — then place the program against the right markets. Most intakes get indicative terms back within one business day.
01
Quick intake
We only ask what the carriers actually need.
02
Benchmark
Side-by-side terms from 10+ specialty cyber carriers.
03
Bind
Plain-language policy review, e-signed and in force.
