Three scenarios dominate the claims data. First, a compromised vendor email chain leads your AP team to redirect a legitimate invoice payment to a new bank account controlled by a criminal. Second, a spoofed executive email instructs your controller to wire funds for a confidential acquisition or urgent tax payment. Third, a threat actor compromises your company's own email system and intercepts outbound payment instructions to your clients, redirecting incoming payments. Each scenario triggers a different coverage grant, and some policies cover only one or two of the three.
Common Wire Transfer Loss Scenarios
A single failed software deployment can trigger a six-figure lawsuit before your development team even identifies the root cause. For technology companies operating in Florida, the exposure is real: missed deadlines, buggy code, and breached service level agreements all carry financial consequences that general liability will not touch. Technology errors and omissions insurance exists to fill that gap, covering the professional liability claims that arise when your services or products fail to perform as promised. Florida's tech corridors in Miami, Tampa, and Orlando each present distinct risk profiles, and understanding how E&O coverage responds to failure-to-perform claims, negligent development allegations, and SLA disputes is not optional for firms that want to survive a lawsuit intact. This guide breaks down the coverage components, policy structure, and limit-setting decisions that matter for Florida tech businesses in 2026.
Understanding Tech E&O in the Florida Market
Florida's technology sector has grown rapidly enough to create a dense concentration of insurable risk. The state now hosts thousands of SaaS providers, managed service companies, IT consultancies, and AI startups competing for enterprise contracts that carry significant liability exposure. That growth has not been matched by a proportional increase in insurance literacy among tech founders and executives, which means many firms are either uninsured or carrying policies that will not respond to the claims they are most likely to face.
Why Florida Tech Firms Face Unique Legal Risks
Florida's tort reform under HB 837 reduced the statute of limitations for negligence claims from four years to two, which compressed the timeline for filing but did not eliminate the underlying exposure. Contract-based claims, which represent the majority of tech E&O disputes, are not governed by the same statute of limitations and can surface years after project delivery. Miami-area startups alone attracted $4.13 billion in venture capital in 2025, with AI-focused companies securing a significant share of that funding. That capital inflow means more contracts, more deliverables, and more opportunities for disputes.
Orlando's technology workforce
nears 80,000 employees, and Tampa's defense-tech and fintech clusters continue to expand. Each metro area produces different claim patterns. Miami sees heavy SaaS and AI disputes tied to investor-backed growth timelines. Tampa generates claims around government contract compliance and financial services integrations. Orlando's simulation and theme-park technology sector creates unique intellectual property and performance disputes.
The Difference Between General Liability and Tech E&O
General liability covers bodily injury and property damage. If a client trips over a cable in your office, your GL policy responds. It does not respond when your code crashes a client's production environment and causes $500,000 in lost revenue.
Tech E&O covers professional services liability: the financial harm that results from your work product failing, your advice being wrong, or your deliverables arriving late. These are the claims that actually threaten technology companies. A general liability policy contains an explicit professional services exclusion, which means every dollar of defense costs and settlement in a negligence or breach-of-contract claim falls on the uninsured firm.
By: Caden Braly
Founder of Bloc Cyber Insurance
INDEX
Bloc Cyber and Its Licensed Producers Are Authorized to Place Cyber Coverage in All 50 U.S. States and The District of Columbia.
Cyber liability insurance covers the financial losses your business faces after a cyberattack or data breach. This page explains what the coverage includes, who needs it, what it costs, and how Bloc Cyber helps you get protected fast.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
Forensic Investigations: Identifying the Source and Scope
Forensic investigators determine how the attacker got in, what data was accessed, whether exfiltration occurred, and whether the threat actor is still present in the network. Their report drives every downstream decision: which individuals must be notified, whether payment card brands must be alerted, and what remediation steps are necessary. Forensic engagements for mid-market companies commonly run between $30,000 and $150,000, depending on the complexity of the environment. The policy form may impose a separate sublimit on forensic costs or bundle them under a single breach response aggregate. Bloc Cyber reviews these sublimits at the insuring-agreement level before binding, so clients understand exactly how much forensic coverage they are purchasing and where the cap sits relative to their actual exposure.
Core Coverage Components: From Code to Contracts
A well-structured tech E&O policy form addresses three primary categories of claim. Each operates under different coverage triggers and may carry separate sublimits or retentions depending on how the policy is written.
Failure-to-Perform and Breach of Contract Claims
Failure-to-perform claims arise when a client alleges that your company did not deliver the services or functionality described in the contract. These claims do not require negligence. The client only needs to show that the contract specified deliverables, you accepted the obligation, and the deliverables were not met.
Most tech E&O forms include a "breach of contract" insuring agreement, but the scope varies dramatically between carriers. Some forms only cover breach of contract when the breach also constitutes a negligent act or omission. Others provide standalone breach-of-contract coverage. The distinction matters because a pure breach claim, where your team simply ran out of time or resources, may not qualify as negligence. If your policy requires a negligent act as a prerequisite, the claim gets denied. This is exactly the kind of gap that a form-level review catches before binding.
Negligent Software Development and Programming Errors
When poor engineering practices cause downstream failures, the resulting claims fall squarely within tech E&O territory. Negligent software development allegations typically involve code that was delivered but performed incorrectly: a billing module that miscalculates charges, an API integration that corrupts data, or a security implementation that leaves a client's network exposed.
Defense costs in these cases escalate quickly because they require expert witnesses to evaluate code quality, development methodology, and industry standards. Your policy's duty-to-defend provision and the way it handles defense costs, whether inside or outside the limit, directly affects how much coverage remains for settlement after litigation expenses.
Missed Service Level Agreements (SLAs) and Uptime Requirements
SLA disputes represent a growing category of tech E&O claims, particularly for managed service providers and SaaS companies. When your contract guarantees 99.9% uptime and your platform experiences extended outages, the financial exposure extends beyond the service credits written into the SLA. Clients may claim consequential damages: lost sales, regulatory penalties, or reputational harm tied to the downtime.
Not every tech E&O policy covers SLA-related claims. Some forms treat SLA penalties as liquidated damages, which are typically excluded. Others classify SLA failures as a failure to perform professional services, which brings them within the coverage grant. You need to know which version your policy form uses before you sign a contract that includes uptime guarantees.
The gap between a basic crime policy and a comprehensive fraud protection program is significant. The table below highlights key differences.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
This comparison illustrates why a general liability policy, even one with a broad "personal and advertising injury" grant, will not respond to a regulatory proceeding. The coverage must be placed specifically under a cyber or technology E&O form that includes regulatory defense as a named insuring agreement.
| Coverage Feature | Basic Crime Policy | Comprehensive Cyber with Fraud Coverage |
|---|---|---|
| Computer Fraud | Typically included | Included |
| Social Engineering | Optional endorsement, low sublimit | Included, higher sublimits available |
| Push Payment Fraud | Often excluded | May be covered as separate grant |
| Account Takeover | May fall under computer fraud | Explicitly covered |
| Forensic Investigation | Not covered | First-party expense coverage |
| Legal and Regulatory Costs | Not covered | Included |
| Callback Verification Required | Yes, strict condition | Yes, but terms vary by form |
| Typical Sublimit Range | $100K - $250K | $250K - $1M+ |
R&W retentions function similarly to a deductible but are typically structured as a percentage of enterprise value. A common retention for mid-market deals sits between 1% and 3% of the transaction value. On a $50 million deal, that means the buyer absorbs the first $500,000 to $1.5 million of covered losses before the insurer pays anything. The retention exists because underwriters expect the buyer's own diligence to catch smaller issues. Retention levels are negotiable and vary by carrier, deal size, and the quality of the diligence package presented during underwriting.
How Retention Works as a Deductible
The Transition from Retention to Drop-Down Coverage
Most R&W policies include a drop-down feature that reduces the retention, often by half, after a specified period, typically 12 months post-closing. If the original retention is $1 million, it drops to $500,000 after the first year. This mechanism reflects the assumption that the most significant breaches surface early. The reduced retention in the later period provides the buyer with more accessible coverage for claims that emerge after the initial post-closing adjustment period. Some policies offer a full drop to zero retention after 18 or 24 months, though this depends on the specific terms negotiated with the underwriter.
| Area | SOC 2 Requirement | Typical Cyber Insurance Requirement |
|---|---|---|
| Multi-Factor Authentication | Required under Security criterion for logical access | Required on all remote access, email, and admin consoles |
| Endpoint Detection & Response | Recommended but not always mandated | Frequently required; some carriers mandate specific vendors |
| Encryption | Required for data in transit; recommended at rest | Required for both in transit and at rest on most applications |
| Incident Response Plan | Required under Security criterion | Required; some carriers want to see tabletop exercise records |
| Backup & Recovery | Covered under Availability criterion | Required with tested restoration procedures |
| Vendor Management | Covered under Confidentiality or Security | Asked about in applications; subcontractor liability coverage may depend on it |
| Employee Training | Required under Security criterion | Required; frequency and phishing simulation results often requested |
A breach-response insuring agreement typically covers the cost of retaining a forensic investigation firm to determine the scope of the intrusion, identify compromised data, and recommend remediation. It also covers breach counsel: attorneys who manage notification obligations, coordinate with regulators, and advise on litigation exposure.
The sequencing matters. Engaging breach counsel first, before the forensic firm, can place the forensic report under attorney-client privilege. This is a practical consideration that affects your litigation posture. Your policy form should not restrict you to a single panel firm if that firm has a conflict or lacks capacity during a widespread event. Bloc Cyber evaluates panel flexibility and pre-approval processes during the placement process so clients are not surprised after an incident.
The Role of Forensic Investigators and Legal Counsel
Comparison: Standard vs. Specialized Tech Coverage
| Coverage Feature | Standard Professional Liability | Specialized Tech E&O |
|---|---|---|
| Negligent acts/omissions | Covered | Covered |
| Breach of contract (standalone) | Often excluded | Typically included |
| SLA failure claims | Excluded or silent | May be covered depending on form |
| Intellectual property infringement | Rarely included | Usually included |
| Network security liability | Not included | Available as combined form |
| Rectification/mitigation costs | Not included | Available on select forms |
| Defense cost structure | Inside the limit | Inside or outside the limit (varies) |
| Technology-specific exclusions | Broad | Narrower, negotiable |
The difference between these two categories is not academic. A standard professional liability form written for consultants or accountants will contain exclusions that gut coverage for a software company. Technology-specific forms are underwritten with code delivery, SaaS operations, and IT services in mind. The endorsements and exclusion language reflect the actual risk profile of a tech firm.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
Determining Coverage Limits for Miami-Based Businesses
Setting the right limit requires more than picking a round number. Your coverage limit needs to reflect your contractual exposure, your largest client relationships, and the regulatory environment you operate in. Miami's concentration of venture-backed companies creates particular pressure because investor-funded clients tend to pursue claims aggressively when projects fail.
Evaluating Contractual Insurance Requirements
Most enterprise contracts specify minimum E&O coverage limits, typically $1 million per claim and $2 million aggregate. Government contracts and healthcare-adjacent work often require higher limits. Before you set your coverage, pull your five largest contracts and review the insurance requirements in each. Your policy limit should meet or exceed the highest contractual requirement you are likely to encounter.
Florida's property insurance claims and lawsuits dropped significantly in 2025 following tort reform, but that trend applies to property and casualty lines, not professional liability. Tech E&O claim frequency has not followed the same downward trajectory, and the average claim severity continues to rise as contract values increase. A firm working with Bloc Cyber would typically review the insuring agreements and endorsements at the form level to confirm that the coverage grant actually matches the contractual obligations you have accepted.
Balancing Deductibles with Project Revenue
Your retention, the amount you pay out of pocket before the policy responds, should be proportional to your project revenue and cash reserves. A $25,000 retention makes sense for a firm with $5 million in annual revenue. That same retention could be catastrophic for a 15-person shop billing $800,000 per year.
Higher retentions reduce premium, but they also create a coverage gap for smaller claims that can still cost $50,000 to $75,000 in defense costs alone. If your average project value is $150,000, a $50,000 retention means you are self-insuring the first third of a single-project claim. That math needs to work for your balance sheet, not just your premium budget.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
FAQ: Does my general business insurance cover hacking?
Almost certainly not. Standard CGL and BOP policies contain electronic data exclusions. Even if your policy has a small "data breach" endorsement, it is typically capped at $50,000 to $100,000, which will not cover a meaningful incident. A standalone cyber liability form provides the breadth and limits required for a real claim.
FAQ: How does a consent order affect my future premiums?
A consent order signals increased risk to underwriters. Expect premium increases at renewal, potentially 25 to 100 percent or more depending on the severity of the order and your compliance track record. Some carriers may decline to renew entirely if the consent order reveals systemic compliance failures.
Law firm cyber coverage is not a commodity product you can purchase by checking a box on a general liability application. The risks are specific: trust account fraud, privileged document exposure, deal data theft, multi-state notification obligations, and business interruption measured in lost billable hours. Your policy needs to reflect those risks at the insuring-agreement level, with sub-limits and retentions that match your actual exposure.
Do not wait for a breach to discover that your social engineering sub-limit is $100,000 on a $1.2 million wire or that your business-interruption waiting period is 24 hours when your systems were down for a week. If you are purchasing your first cyber policy or renewing an existing one, have a specialist review the actual policy form with you. Bloc Cyber's practice is built entirely around cyber, technology E&O, and AI liability placement. You can
request a coverage review to have a specialist walk through the insuring agreements, sub-limits, and exclusions specific to your firm's risk profile before you bind.
Common Questions About Tech Insurance in Florida
Does my general liability policy cover a client suing over failed software? No. General liability excludes professional services claims. You need a separate tech E&O policy or a combined cyber and tech E&O form to respond to allegations of negligent work product or failed deliverables.
Can I add tech E&O to my business owner's policy? Some carriers offer a professional liability endorsement on a BOP, but these endorsements are typically too narrow for technology companies. They often exclude breach of contract, SLA claims, and intellectual property disputes. A standalone tech E&O policy provides broader, more reliable coverage.
What triggers a tech E&O claim? A written demand, a lawsuit, or a regulatory proceeding alleging that your technology services or products caused financial harm. Most policies are claims-made, meaning the claim must be reported during the policy period or an extended reporting period.
How much does tech E&O insurance cost in Florida? Premium depends on revenue, services offered, client concentration, claims history, and contract terms. A firm billing $2 million annually in SaaS revenue might see premiums ranging from $3,000 to $12,000 depending on the form and limit selected. Orlando's tech sector, which continues to expand rapidly, has seen competitive pricing as more carriers enter the Florida market.
Do I need both cyber liability and tech E&O? If you handle client data or operate networked systems, yes. Cyber liability covers data breaches and network security incidents. Tech E&O covers professional services failures. Many carriers offer combined forms that address both exposures under a single policy, which is how Bloc Cyber typically structures placement for technology firms.
Is tech E&O required by Florida law? Florida does not mandate tech E&O coverage by statute. Your clients, however, almost certainly require it by contract. Losing a contract because you cannot meet insurance requirements costs more than the premium.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
Post-Incident Forensic and Legal Obligations
After a SCADA or OT intrusion, you will likely face parallel investigations: your own internal forensic team, your insurer's panel forensics firm, CISA, and potentially your state public utility commission. A coordinated attack on Minnesota water utilities demonstrated how quickly a regional incident can trigger multi-agency scrutiny.
Your policy should not restrict your choice of forensic investigators to a panel that lacks OT expertise. If the form requires you to use a pre-approved vendor, confirm that vendor has ICS forensic capability. The wrong forensic team can miss artifacts specific to industrial protocols like Modbus or DNP3, leaving you with an incomplete investigation and a disputed claim.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
Making the Right Choice for Your Tech Firm
Florida technology E&O insurance is not a commodity product you purchase by price alone. The policy form dictates whether a claim gets paid or denied, and the differences between forms are significant enough to determine whether your company survives a major dispute. Coverage for failure-to-perform claims, negligent development, and SLA breaches varies by carrier, by endorsement, and by how the insuring agreements are written.
Your priority should be matching the policy form to your actual risk exposure: the contracts you sign, the services you deliver, and the clients you serve across Miami, Tampa, Orlando, or anywhere else in Florida. A policy that looks adequate on the declarations page can contain sublimits, exclusions, or retention structures that leave you exposed precisely when you need coverage.
If you are purchasing your first tech E&O policy or reconsidering your current placement, request a coverage review so a specialist can walk through the policy form with you. Understanding where coverage stops is the only way to know what a claim will actually cost your firm.
ABOUT THE AUTHOR
Caden Braly
— Founder, Bloc Cyber
I'm Caden Braly, founder of Bloc Cyber, the specialty cyber insurance arm of Braly Insurance. I built Bloc Cyber around one idea: businesses deserve coverage that actually responds when a cyberattack happens. I work closely with clients to understand their exposure, place the right policy through specialty carriers, and stand with them through the claim. My goal is simple — give every business straight answers and protection they can trust.
Full profile → caden@bloccyber.com LinkedIn
Industries We Protect
Cyber Coverage Built for Your Industry
Every industry faces a different cyber threat, from patient records in healthcare to wire fraud in construction. Bloc Cyber matches coverage to the risks your sector actually faces, drawing on specialty carriers that understand your business. Find your industry below to see how we protect it.
Healthcare
Banking
Retail / E-Commerce
Legal
Technology / SaaS
Education
Energy / Utilities
Manufacturing
Construction
Defense
Healthcare
HIPAA-grade protection for patient data
725
healthcare breaches disclosed in 2024
HIPAA-grade protection for patient data
▣ Ransomware on EHR systems
▣ PHI exfiltration
▣ Medical device exploits
▣ Business email compromise
Sub-sectors we place
Hospitals and health systems
Physician practices and specialty clinics
Dental practices and DSOs
Behavioral health and addiction treatment centers
Medical billing and revenue cycle management firms
Typical turnaround for indication of terms: 1 business day.
Banking
Coverage that meets FFIEC and NYDFS expectations
$5.9M
average cost of a financial sector breach
Common threats we underwrite against
▣ Wire fraud and BEC
▣ Credential stuffing
▣ Third-party vendor risk
▣ Ransomware
Sub-sectors we place
Community banks
Credit unions
Mortgage lenders and loan originators
Wealth management and RIAs
Payment processors and merchant acquirers
Typical turnaround for indication of terms: 1 business day.
Retail / E-Commerce
PCI-DSS aligned coverage for every checkout
42%
of retailers hit by ransomware in the last year
Common threats we underwrite against
▣ Magecart / card skimming
▣ POS malware
▣ Account takeover
▣ Supply-chain intrusion
Sub-sectors we place
Direct-to-consumer (DTC) brands
Shopify and marketplace sellers
Brick-and-mortar multi-location retailers
Restaurants and QSR franchises
Grocery and specialty food retail
Typical turnaround for indication of terms: 1 business day.
Legal
Privilege, client files, and trust-account safeguards
1 in 4
law firms reported a breach in 2024
Common threats we underwrite against
▣ Wire-transfer fraud
▣ Privileged data theft
▣ Email account compromise
▣ Ransomware
Sub-sectors we place
AmLaw / large firms
Boutique litigation firms
Personal injury and plaintiffs’ firms
Estate planning and trust attorneys
Title and real estate closing firms
Typical turnaround for indication of terms: 1 business day.
Technology / SaaS
SOC 2 and ISO-aligned risk transfer
$4.88M
avg. cost of a SaaS breach in 2024
Common threats we underwrite against
▣ Supply-chain attacks
▣ Cloud misconfiguration
▣ Token and key theft
▣ Zero-day exploits
Sub-sectors we place
B2B SaaS platforms
Managed service providers (MSPs) and MSSPs
Fintech startups
AI and machine learning companies
Cloud hosting and infrastructure providers
Typical turnaround for indication of terms: 1 business day.
Education
FERPA-aligned coverage for student and research data
80%
of K–12 districts hit by ransomware since 2022
Common threats we underwrite against
▣ Ransomware on district networks
▣ Student PII theft
▣ Fake invoice fraud
▣ DDoS on exam platforms
Sub-sectors we place
K-12 public school districts
Private and charter schools
Colleges and universities
EdTech platforms
Tutoring, test prep, and online learning providers
Typical turnaround for indication of terms: 1 business day.
Energy / Utilities
OT and IT coverage for critical infrastructure
24/7
operational-tech monitoring requirements
Common threats we underwrite against
▣ ICS/SCADA intrusion
▣ Nation-state actors
▣ Ransomware on OT
▣ Insider threat
Sub-sectors we place
Municipal utilities (water, electric, gas)
Oil and gas operators
Pipeline and midstream companies
Renewable energy (solar, wind) developers
Electric cooperatives and rural utilities
Typical turnaround for indication of terms: 1 business day.
Manufacturing
Business interruption protection for connected plants
25%
of all ransomware attacks target manufacturing
Common threats we underwrite against
▣ Ransomware halting production
▣ IP theft
▣ ICS exploits
▣ Vendor compromise
Sub-sectors we place
Industrial and heavy equipment manufacturers
Food and beverage processing
Pharmaceutical and medical device manufacturers
Automotive and parts suppliers
Aerospace component manufacturers
Typical turnaround for indication of terms: 1 business day.
Construction
Protection for project files, wires, and jobsite tech
$200K+
average wire-fraud loss in construction
Common threats we underwrite against
▣ Wire-transfer diversion
▣ BEC on project payments
▣ Stolen bid data
▣ Ransomware
Sub-sectors we place
General contractors
Commercial HVAC, electrical, and plumbing subs
Civil and infrastructure contractors
Homebuilders and residential developers
Architecture and engineering (A&E) firms
Typical turnaround for indication of terms: 1 business day.
Defense
CMMC, DFARS, and CUI-compliant risk transfer
CMMC
2.0 compliance required by 2026
Common threats we underwrite against
▣ CUI exfiltration
▣ Nation-state APTs
▣ Supply-chain compromise
▣ Cleared-personnel targeting
Sub-sectors we place
DoD prime contractors
CMMC-regulated subcontractors
Defense software and systems integrators
Aerospace and satellite contractors
Federal IT and cleared staffing firms
Typical turnaround for indication of terms: 1 business day.
The Bloc system
One foundation.
Ten industry-specific builds.
The Bloc mark is built from stackable planes — each one a different angle on the same core structure. That’s how we place coverage: one underwriting discipline, tuned and re-tuned for every industry we serve.
Coverage
A policy you can actually read.
Structured in three clean blocs.
01
First-Party
Your direct losses when an incident hits your business.
✓
Incident response & forensics
✓
Business interruption
✓ Data restoration
✓ Cyber extortion / ransomware
✓ Funds transfer fraud
✓ Reputational harm
02
Third-Party
Your liability to clients, partners, and regulators.
✓
Network security liability
✓
Privacy liability (HIPAA, GDPR, state laws)
✓ Regulatory defense & fines
✓ PCI-DSS fines and assessments
✓ Media liability
✓ Breach notification costs
03
Specialty
Advanced coverages for complex risks and contracts.
✓
Technology E&O
✓
Social engineering fraud
✓ Contingent business interruption
✓ Systems failure
✓ Bricking & hardware replacement
✓ CMMC / regulatory-specific endorsements
Typical limits placed
$1M / $1M starter
$5M / $10M mid-market
$25M+ layered towers
Custom retentions
Common Questions
Cyber Liability Insurance, Explained
What does cyber insurance cover?
Cyber insurance covers the financial losses from a data breach or cyberattack. This includes breach response, legal fees, customer notification, ransomware, business interruption, and regulatory fines, depending on your policy.
Does my business really need cyber insurance?
Yes. Any business that stores customer data, processes payments, or relies on connected systems faces cyber risk. Small and mid-sized companies are frequent targets because they often have fewer defenses.
How much does cyber insurance cost?
Cost depends on your industry, revenue, data volume, and security practices. We market your risk to multiple carriers to find strong coverage at a competitive price. Request a quote for an exact figure.
What is the difference between first-party and third-party cyber coverage?
First-party coverage pays for your own losses, like data recovery and lost income. Third-party coverage pays for claims from others harmed by a breach on your systems.
How fast can I get a quote?
Most clients receive a quote in under 24 hours after we review the details of their business and exposure.
What should I do first after a cyberattack?
Contact us right away. We help you start breach response, connect you with forensic and legal support, and guide your claim so you contain the damage quickly.
Insights
Field notes from the placement desk.
What carriers are asking right now.
Start a quote
Tell us about your business.
We’ll come back with terms.
We’ll review your stack, your contracts, and your exposure — then place the program against the right markets. Most intakes get indicative terms back within one business day.
01
Quick intake
We only ask what the carriers actually need.
02
Benchmark
Side-by-side terms from 10+ specialty cyber carriers.
03
Bind
Plain-language policy review, e-signed and in force.
