Three scenarios dominate the claims data. First, a compromised vendor email chain leads your AP team to redirect a legitimate invoice payment to a new bank account controlled by a criminal. Second, a spoofed executive email instructs your controller to wire funds for a confidential acquisition or urgent tax payment. Third, a threat actor compromises your company's own email system and intercepts outbound payment instructions to your clients, redirecting incoming payments. Each scenario triggers a different coverage grant, and some policies cover only one or two of the three.
Common Wire Transfer Loss Scenarios
A wire transfer leaves your Baltimore office at 2:14 p.m. on a Tuesday. By 2:16 p.m., the funds are in a foreign account controlled by a criminal who spoofed your vendor's email domain. Your general liability policy will not respond. Your property policy will not respond. Unless your crime or cyber policy carries the right insuring agreement, that money is gone. This is the reality facing businesses across Maryland, from defense contractors in Annapolis to healthcare practices in Columbia, and the gap between what owners assume is covered and what the policy form actually says can be six or seven figures wide. Cyber crime insurance for Maryland businesses, covering computer fraud, funds transfer fraud, and social engineering losses, is no longer optional. It is a structural requirement for any company that moves money electronically. This guide breaks down the specific coverage grants, the limits that matter, and the compliance triggers that apply in Baltimore, Columbia, and Annapolis.
Understanding Cyber Crime Risks for Maryland Businesses
Maryland sits at the intersection of federal contracting, healthcare, financial services, and a growing technology sector. That concentration of sensitive data and high-value transactions makes the state a persistent target. The Department of Defense's final DFARS cybersecurity rule for government contractors and subcontractors has raised compliance expectations for hundreds of small and mid-size firms operating in the Baltimore-Washington corridor. Even businesses outside the defense supply chain face escalating exposure as AI-driven attack tools lower the cost and skill required to execute fraud.
The Threat Landscape in Baltimore, Columbia, and Annapolis
Baltimore's port logistics companies, Columbia's technology firms, and Annapolis's state government vendors each present distinct attack surfaces. A healthcare practice in Anne Arundel County experienced a cyber attack that breached patient records, exposing the organization to both regulatory penalties and reputational harm. Wire fraud targeting real estate closings has hit Maryland title companies repeatedly, with criminals intercepting closing instructions and redirecting six-figure wire transfers. The threat is not hypothetical: it is a recurring operational risk with measurable financial consequences.
Why General Liability Isn't Enough for Digital Assets
General liability policies are designed for bodily injury and property damage claims. They do not cover stolen funds, fraudulent wire transfers, or the cost of forensic investigation after a business email compromise. A commercial property policy may cover physical theft of a laptop, but it will not pay for the $200,000 a criminal siphoned from your operating account through a spoofed invoice. The gap is structural, not accidental. Insurers designed these policies for tangible risks, and digital crime falls outside their coverage grants. You need a dedicated crime or cyber policy with explicit insuring agreements for computer fraud, funds transfer fraud, and social engineering.
By: Caden Braly
Founder of Bloc Cyber Insurance
INDEX
Bloc Cyber and Its Licensed Producers Are Authorized to Place Cyber Coverage in All 50 U.S. States and The District of Columbia.
Cyber liability insurance covers the financial losses your business faces after a cyberattack or data breach. This page explains what the coverage includes, who needs it, what it costs, and how Bloc Cyber helps you get protected fast.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
Forensic Investigations: Identifying the Source and Scope
Forensic investigators determine how the attacker got in, what data was accessed, whether exfiltration occurred, and whether the threat actor is still present in the network. Their report drives every downstream decision: which individuals must be notified, whether payment card brands must be alerted, and what remediation steps are necessary. Forensic engagements for mid-market companies commonly run between $30,000 and $150,000, depending on the complexity of the environment. The policy form may impose a separate sublimit on forensic costs or bundle them under a single breach response aggregate. Bloc Cyber reviews these sublimits at the insuring-agreement level before binding, so clients understand exactly how much forensic coverage they are purchasing and where the cap sits relative to their actual exposure.
Core Coverage Pillars: Fraud and Social Engineering
Three distinct insuring agreements form the foundation of cyber crime coverage. Each one responds to a different method of attack, and confusing them can leave you with a denied claim. Understanding how your policy defines each peril is the single most important step before you bind coverage.
Computer Fraud vs. Funds Transfer Fraud
Computer fraud coverage typically responds when a third party uses a computer to unlawfully transfer, pay, or deliver your money or securities. The key trigger is unauthorized entry into your computer system or a system you rely on. Funds transfer fraud is narrower: it covers losses from fraudulent instructions sent to a financial institution directing it to transfer, pay, or deliver funds from your account. The distinction matters because a policy may cover one and not the other. If a hacker breaks into your accounting software and initiates a payment, that is computer fraud. If a criminal sends forged wire instructions to your bank using your company's name, that is funds transfer fraud. Some policy forms bundle these together; others separate them with different sublimits and retentions.
Social Engineering Fraud and Deceptive Communication
Social engineering fraud is the coverage most frequently misunderstood and most commonly sublimited. It responds when an employee is tricked by a fraudulent communication, typically an email or phone call, into voluntarily transferring funds to a criminal. The word "voluntarily" is critical. Because the employee authorizes the transfer, it does not meet the "unauthorized" trigger in a standard computer fraud insuring agreement. Many carriers offer social engineering coverage only as an endorsement with sublimits as low as $25,000 or $50,000, far below the actual exposure for a company processing regular vendor payments. At Bloc Cyber, form-level review of sublimits and retentions before binding ensures you know exactly where the coverage grant stops and what that gap will cost you.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
FAQ: Does my general business insurance cover hacking?
Almost certainly not. Standard CGL and BOP policies contain electronic data exclusions. Even if your policy has a small "data breach" endorsement, it is typically capped at $50,000 to $100,000, which will not cover a meaningful incident. A standalone cyber liability form provides the breadth and limits required for a real claim.
FAQ: How does a consent order affect my future premiums?
A consent order signals increased risk to underwriters. Expect premium increases at renewal, potentially 25 to 100 percent or more depending on the severity of the order and your compliance track record. Some carriers may decline to renew entirely if the consent order reveals systemic compliance failures.
Law firm cyber coverage is not a commodity product you can purchase by checking a box on a general liability application. The risks are specific: trust account fraud, privileged document exposure, deal data theft, multi-state notification obligations, and business interruption measured in lost billable hours. Your policy needs to reflect those risks at the insuring-agreement level, with sub-limits and retentions that match your actual exposure.
Do not wait for a breach to discover that your social engineering sub-limit is $100,000 on a $1.2 million wire or that your business-interruption waiting period is 24 hours when your systems were down for a week. If you are purchasing your first cyber policy or renewing an existing one, have a specialist review the actual policy form with you. Bloc Cyber's practice is built entirely around cyber, technology E&O, and AI liability placement. You can
request a coverage review to have a specialist walk through the insuring agreements, sub-limits, and exclusions specific to your firm's risk profile before you bind.
Comparing Coverage Types and Limits
Comparison Table: Standard Cyber vs. Crime Endorsements
| Feature | Standalone Cyber Policy | Crime Policy with Cyber Endorsement | BOP/GL Add-On |
|---|---|---|---|
| Computer Fraud | Full policy limit (typical) | Full policy limit | Rarely included |
| Funds Transfer Fraud | Full policy limit or sublimited | Full policy limit | Rarely included |
| Social Engineering | Sublimited ($50K-$250K typical) | Sublimited ($25K-$100K typical) | Not available |
| Incident Response | Included (breach coach, forensics) | Not included | Not included |
| Regulatory Defense | Included | Not included | Not included |
| Waiting Period | 6-12 hours typical | None | N/A |
| Typical Retention | $1,000-$10,000 | $2,500-$25,000 | N/A |
The table illustrates a critical point: a standalone cyber policy typically provides broader coverage grants and lower retentions than a crime endorsement bolted onto a commercial package. The trade-off is that standalone cyber policies may sublimit social engineering more aggressively than a dedicated crime form. This is why policy-specific placement, reviewing each insuring agreement and endorsement individually, produces better outcomes than purchasing a bundled product.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
Your SOC 2 report documents what your controls look like. Your cyber policy form defines what happens financially when those controls fail. A first-party breach response grant typically covers forensic investigation, legal counsel, notification costs, and credit monitoring. A third-party liability grant covers defense costs and settlements arising from claims by affected individuals or businesses. Technology E&O coverage responds when a failure in your product or service causes financial harm to a client.
The critical question is whether the policy form covers the specific failure mode your SOC 2 report flagged. If your report noted an exception in access management and an attacker later exploited that exact weakness, the carrier's claims team will review whether the application was answered accurately. Misrepresentation on an application can void coverage entirely, which is why aligning your SOC 2 findings with your insurance application answers is not optional.
The table above shows that SOC 2 and cyber insurance requirements overlap heavily, but insurance applications often go further on specific technical controls. A SOC 2 report alone does not satisfy every underwriting question.
Determining Appropriate Limits for Your Industry
Evaluating Transaction Volumes and Risk Exposure
Your coverage limit should reflect your actual financial exposure, not a round number pulled from a rate table. A 50-employee government contractor in Columbia processing $3 million in monthly wire transfers needs a fundamentally different limit than a 15-person marketing agency in Baltimore that pays vendors by ACH twice a month. Start by calculating your largest single transaction, your average monthly outbound payment volume, and the maximum amount a single compromised employee could authorize before internal controls would catch it. That analysis produces a defensible limit recommendation rather than a guess.
Annual cyber insurance premiums for a 10-person business in the Baltimore-Washington corridor are projected to range from $1,000 to $3,000 depending on industry, revenue, and security posture. Larger firms with higher transaction volumes will pay proportionally more, but the cost of a $250,000 social engineering loss dwarfs even the most expensive premium.
Maryland Regulatory Requirements and Compliance
Maryland's Personal Information Protection Act requires businesses to notify affected individuals within 45 days of discovering a breach involving personal information. The state also requires notification to the Attorney General when a breach affects 1,000 or more residents. For healthcare entities, HIPAA obligations layer on top of state law, creating dual notification and regulatory defense exposure. Maryland businesses holding cybersecurity obligations as government contractors face additional compliance requirements under CMMC and DFARS. Your cyber policy's regulatory defense coverage should align with these specific obligations. A policy that covers breach notification costs but excludes regulatory proceedings leaves a significant gap for any Maryland company subject to AG investigation.
The gap between a basic crime policy and a comprehensive fraud protection program is significant. The table below highlights key differences.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
This comparison illustrates why a general liability policy, even one with a broad "personal and advertising injury" grant, will not respond to a regulatory proceeding. The coverage must be placed specifically under a cyber or technology E&O form that includes regulatory defense as a named insuring agreement.
| Coverage Feature | Basic Crime Policy | Comprehensive Cyber with Fraud Coverage |
|---|---|---|
| Computer Fraud | Typically included | Included |
| Social Engineering | Optional endorsement, low sublimit | Included, higher sublimits available |
| Push Payment Fraud | Often excluded | May be covered as separate grant |
| Account Takeover | May fall under computer fraud | Explicitly covered |
| Forensic Investigation | Not covered | First-party expense coverage |
| Legal and Regulatory Costs | Not covered | Included |
| Callback Verification Required | Yes, strict condition | Yes, but terms vary by form |
| Typical Sublimit Range | $100K - $250K | $250K - $1M+ |
R&W retentions function similarly to a deductible but are typically structured as a percentage of enterprise value. A common retention for mid-market deals sits between 1% and 3% of the transaction value. On a $50 million deal, that means the buyer absorbs the first $500,000 to $1.5 million of covered losses before the insurer pays anything. The retention exists because underwriters expect the buyer's own diligence to catch smaller issues. Retention levels are negotiable and vary by carrier, deal size, and the quality of the diligence package presented during underwriting.
How Retention Works as a Deductible
The Transition from Retention to Drop-Down Coverage
Most R&W policies include a drop-down feature that reduces the retention, often by half, after a specified period, typically 12 months post-closing. If the original retention is $1 million, it drops to $500,000 after the first year. This mechanism reflects the assumption that the most significant breaches surface early. The reduced retention in the later period provides the buyer with more accessible coverage for claims that emerge after the initial post-closing adjustment period. Some policies offer a full drop to zero retention after 18 or 24 months, though this depends on the specific terms negotiated with the underwriter.
Common Questions About Maryland Cyber Insurance
FAQ: How much does a typical policy cost in Baltimore?
For a 10-person firm in the Baltimore metro, expect annual premiums between $1,000 and $3,000 for a $1 million aggregate cyber policy. Premiums increase with employee count, revenue, transaction volume, and industry risk classification. Healthcare and financial services firms typically pay more than professional services or retail businesses.
FAQ: Does this cover my employees stealing money?
Employee theft is covered under a crime policy's employee dishonesty or fidelity insuring agreement, not under computer fraud or social engineering coverage. If an employee intentionally diverts company funds, you need a fidelity bond or crime policy with an employee theft grant. Cyber policies do not cover dishonest acts by your own staff.
FAQ: What is the difference between a hack and social engineering?
A hack involves unauthorized access to a computer system. Social engineering involves manipulating a person into voluntarily performing an action, such as wiring funds or sharing credentials. The distinction determines which insuring agreement responds. A denied claim often results from filing under the wrong coverage grant.
FAQ: Do I need a separate policy for wire transfer protection?
Not necessarily. Many standalone cyber policies include funds transfer fraud coverage within the policy form. However, the sublimit may be inadequate for your transaction volume. Review the specific insuring agreement and sublimit before assuming your wire transfers are protected. Some businesses carry both a cyber policy and a standalone crime policy to ensure full-limit coverage across all fraud types.
We start with a twenty-minute call to walk through your contracts, your draw process, your tech stack, and the last twelve months of attempted fraud. From there we go to market with ten-plus carriers, benchmark terms side-by-side, and present the options in plain language with recommended limits and retentions. Most intakes get indicative terms within one business day.
| Coverage Element | Commercial General Liability | Cyber Insurance |
|---|---|---|
| Data breach notification costs | Not covered | Covered under first-party |
| Ransomware payment | Not covered | Covered (subject to sublimit) |
| Regulatory defense | Not covered | Covered under third-party |
| Business interruption from cyberattack | Not covered | Covered with waiting period |
| Funds transfer fraud | Not covered | Covered via cyber crime endorsement |
| Third-party lawsuit over data loss | Excluded or severely limited | Covered under third-party liability |
| Technology product failure | Not covered | Covered under Tech E&O |
Most states have not passed explicit statutes declaring regulatory fines insurable or uninsurable. Instead, the question turns on public policy: courts in some jurisdictions hold that allowing insurance to pay a punitive or regulatory fine would undermine the fine's deterrent purpose. New York, for example, has case law suggesting that certain regulatory penalties are uninsurable on public policy grounds. Texas and California courts have taken different positions depending on the type of fine and the regulatory scheme involved.
Your policy form will typically include language stating that fines and penalties are covered "to the extent insurable under applicable law." This shifts the jurisdictional analysis to the time of claim. Bloc Cyber maintains state-by-state fluency in breach-notification triggers and regulatory defense exposure, which matters when your operations span multiple states with different public policy positions on fine insurability.
State-by-State Variations in Public Policy and Uninsurable Fines
Companies with operations in the EU, UK, or Asia-Pacific face additional complexity. GDPR fines imposed by European data protection authorities can reach four percent of global annual revenue. Whether a US-placed policy can respond to a GDPR fine depends on the policy's territorial scope, the choice-of-law provisions, and whether the jurisdiction where the fine is imposed permits its insurance.
Many standard cyber forms limit territorial coverage to the United States and its territories. If your company has employees, customers, or data processing activities in Europe, you need a form with international regulatory coverage or a locally admitted policy in the relevant jurisdiction. The cost of getting this wrong is not theoretical: monitor and compliance fees in cross-border enforcement actions can compound rapidly when multiple regulators coordinate investigations.
International Considerations for Multinational Regulatory Risks
Addressing Known Issues and Exclusions
Any issue identified during diligence that is disclosed to the underwriter becomes a known issue and is excluded from coverage. This is a fundamental principle of R&W insurance: it covers unknown breaches, not problems you already know about. Buyers sometimes assume they can disclose a problem and still obtain coverage for it. They cannot. The underwriter will carve out any known matter, and the buyer must negotiate a specific indemnity from the seller or accept the risk. This is where the interplay between your diligence process and your insurance placement becomes critical: thoroughness in diligence improves your coverage, but every issue you find narrows it.
For companies that carry cyber liability or technology E&O policies, this dynamic should feel familiar. At Bloc Cyber, we see a parallel in how cyber insurers evaluate a company's security posture before binding coverage: known vulnerabilities get excluded or trigger higher retentions, just as known issues do in R&W underwriting.
Post-Incident Forensic and Legal Obligations
After a SCADA or OT intrusion, you will likely face parallel investigations: your own internal forensic team, your insurer's panel forensics firm, CISA, and potentially your state public utility commission. A coordinated attack on Minnesota water utilities demonstrated how quickly a regional incident can trigger multi-agency scrutiny.
Your policy should not restrict your choice of forensic investigators to a panel that lacks OT expertise. If the form requires you to use a pre-approved vendor, confirm that vendor has ICS forensic capability. The wrong forensic team can miss artifacts specific to industrial protocols like Modbus or DNP3, leaving you with an incomplete investigation and a disputed claim.
How much does cyber insurance cost for a small firm?
A firm of 10 to 25 attorneys can typically expect premiums in the range of $3,000 to $12,000 annually for $1 million in coverage, depending on practice areas, security controls in place, and claims history. Firms handling real estate closings or M&A work will pay more because of the wire-fraud exposure.
What This Means for Your Business
Maryland businesses operating in Baltimore, Columbia, and Annapolis face a specific set of cyber crime exposures that general commercial insurance does not address. Computer fraud, funds transfer fraud, and social engineering fraud each require their own insuring agreement with limits calibrated to your actual transaction exposure. A growing number of Maryland cybersecurity firms are developing AI-driven threat detection tools, but technology alone does not eliminate the need for financial protection when controls fail.
The most common mistake we see at Bloc Cyber is a business owner who assumes their existing commercial package covers wire fraud. It almost never does. The second most common mistake is accepting a social engineering sublimit of $25,000 when the company routinely processes six-figure payments. Both mistakes are avoidable with a form-level review before binding.
If you are purchasing your first cyber crime policy or renewing an existing one, request a review of the actual policy form so a specialist can walk you through the insuring agreements, sublimits, and retentions line by line. You can request a coverage review to see exactly where your current protection ends and where the exposure begins.
ABOUT THE AUTHOR
Caden Braly
— Founder, Bloc Cyber
I'm Caden Braly, founder of Bloc Cyber, the specialty cyber insurance arm of Braly Insurance. I built Bloc Cyber around one idea: businesses deserve coverage that actually responds when a cyberattack happens. I work closely with clients to understand their exposure, place the right policy through specialty carriers, and stand with them through the claim. My goal is simple — give every business straight answers and protection they can trust.
Full profile → caden@bloccyber.com LinkedIn
Industries We Protect
Cyber Coverage Built for Your Industry
Every industry faces a different cyber threat, from patient records in healthcare to wire fraud in construction. Bloc Cyber matches coverage to the risks your sector actually faces, drawing on specialty carriers that understand your business. Find your industry below to see how we protect it.
Healthcare
Banking
Retail / E-Commerce
Legal
Technology / SaaS
Education
Energy / Utilities
Manufacturing
Construction
Defense
Healthcare
HIPAA-grade protection for patient data
725
healthcare breaches disclosed in 2024
HIPAA-grade protection for patient data
▣ Ransomware on EHR systems
▣ PHI exfiltration
▣ Medical device exploits
▣ Business email compromise
Sub-sectors we place
Hospitals and health systems
Physician practices and specialty clinics
Dental practices and DSOs
Behavioral health and addiction treatment centers
Medical billing and revenue cycle management firms
Typical turnaround for indication of terms: 1 business day.
Banking
Coverage that meets FFIEC and NYDFS expectations
$5.9M
average cost of a financial sector breach
Common threats we underwrite against
▣ Wire fraud and BEC
▣ Credential stuffing
▣ Third-party vendor risk
▣ Ransomware
Sub-sectors we place
Community banks
Credit unions
Mortgage lenders and loan originators
Wealth management and RIAs
Payment processors and merchant acquirers
Typical turnaround for indication of terms: 1 business day.
Retail / E-Commerce
PCI-DSS aligned coverage for every checkout
42%
of retailers hit by ransomware in the last year
Common threats we underwrite against
▣ Magecart / card skimming
▣ POS malware
▣ Account takeover
▣ Supply-chain intrusion
Sub-sectors we place
Direct-to-consumer (DTC) brands
Shopify and marketplace sellers
Brick-and-mortar multi-location retailers
Restaurants and QSR franchises
Grocery and specialty food retail
Typical turnaround for indication of terms: 1 business day.
Legal
Privilege, client files, and trust-account safeguards
1 in 4
law firms reported a breach in 2024
Common threats we underwrite against
▣ Wire-transfer fraud
▣ Privileged data theft
▣ Email account compromise
▣ Ransomware
Sub-sectors we place
AmLaw / large firms
Boutique litigation firms
Personal injury and plaintiffs’ firms
Estate planning and trust attorneys
Title and real estate closing firms
Typical turnaround for indication of terms: 1 business day.
Technology / SaaS
SOC 2 and ISO-aligned risk transfer
$4.88M
avg. cost of a SaaS breach in 2024
Common threats we underwrite against
▣ Supply-chain attacks
▣ Cloud misconfiguration
▣ Token and key theft
▣ Zero-day exploits
Sub-sectors we place
B2B SaaS platforms
Managed service providers (MSPs) and MSSPs
Fintech startups
AI and machine learning companies
Cloud hosting and infrastructure providers
Typical turnaround for indication of terms: 1 business day.
Education
FERPA-aligned coverage for student and research data
80%
of K–12 districts hit by ransomware since 2022
Common threats we underwrite against
▣ Ransomware on district networks
▣ Student PII theft
▣ Fake invoice fraud
▣ DDoS on exam platforms
Sub-sectors we place
K-12 public school districts
Private and charter schools
Colleges and universities
EdTech platforms
Tutoring, test prep, and online learning providers
Typical turnaround for indication of terms: 1 business day.
Energy / Utilities
OT and IT coverage for critical infrastructure
24/7
operational-tech monitoring requirements
Common threats we underwrite against
▣ ICS/SCADA intrusion
▣ Nation-state actors
▣ Ransomware on OT
▣ Insider threat
Sub-sectors we place
Municipal utilities (water, electric, gas)
Oil and gas operators
Pipeline and midstream companies
Renewable energy (solar, wind) developers
Electric cooperatives and rural utilities
Typical turnaround for indication of terms: 1 business day.
Manufacturing
Business interruption protection for connected plants
25%
of all ransomware attacks target manufacturing
Common threats we underwrite against
▣ Ransomware halting production
▣ IP theft
▣ ICS exploits
▣ Vendor compromise
Sub-sectors we place
Industrial and heavy equipment manufacturers
Food and beverage processing
Pharmaceutical and medical device manufacturers
Automotive and parts suppliers
Aerospace component manufacturers
Typical turnaround for indication of terms: 1 business day.
Construction
Protection for project files, wires, and jobsite tech
$200K+
average wire-fraud loss in construction
Common threats we underwrite against
▣ Wire-transfer diversion
▣ BEC on project payments
▣ Stolen bid data
▣ Ransomware
Sub-sectors we place
General contractors
Commercial HVAC, electrical, and plumbing subs
Civil and infrastructure contractors
Homebuilders and residential developers
Architecture and engineering (A&E) firms
Typical turnaround for indication of terms: 1 business day.
Defense
CMMC, DFARS, and CUI-compliant risk transfer
CMMC
2.0 compliance required by 2026
Common threats we underwrite against
▣ CUI exfiltration
▣ Nation-state APTs
▣ Supply-chain compromise
▣ Cleared-personnel targeting
Sub-sectors we place
DoD prime contractors
CMMC-regulated subcontractors
Defense software and systems integrators
Aerospace and satellite contractors
Federal IT and cleared staffing firms
Typical turnaround for indication of terms: 1 business day.
The Bloc system
One foundation.
Ten industry-specific builds.
The Bloc mark is built from stackable planes — each one a different angle on the same core structure. That’s how we place coverage: one underwriting discipline, tuned and re-tuned for every industry we serve.
Coverage
A policy you can actually read.
Structured in three clean blocs.
01
First-Party
Your direct losses when an incident hits your business.
✓
Incident response & forensics
✓
Business interruption
✓ Data restoration
✓ Cyber extortion / ransomware
✓ Funds transfer fraud
✓ Reputational harm
02
Third-Party
Your liability to clients, partners, and regulators.
✓
Network security liability
✓
Privacy liability (HIPAA, GDPR, state laws)
✓ Regulatory defense & fines
✓ PCI-DSS fines and assessments
✓ Media liability
✓ Breach notification costs
03
Specialty
Advanced coverages for complex risks and contracts.
✓
Technology E&O
✓
Social engineering fraud
✓ Contingent business interruption
✓ Systems failure
✓ Bricking & hardware replacement
✓ CMMC / regulatory-specific endorsements
Typical limits placed
$1M / $1M starter
$5M / $10M mid-market
$25M+ layered towers
Custom retentions
Common Questions
Cyber Liability Insurance, Explained
What does cyber insurance cover?
Cyber insurance covers the financial losses from a data breach or cyberattack. This includes breach response, legal fees, customer notification, ransomware, business interruption, and regulatory fines, depending on your policy.
Does my business really need cyber insurance?
Yes. Any business that stores customer data, processes payments, or relies on connected systems faces cyber risk. Small and mid-sized companies are frequent targets because they often have fewer defenses.
How much does cyber insurance cost?
Cost depends on your industry, revenue, data volume, and security practices. We market your risk to multiple carriers to find strong coverage at a competitive price. Request a quote for an exact figure.
What is the difference between first-party and third-party cyber coverage?
First-party coverage pays for your own losses, like data recovery and lost income. Third-party coverage pays for claims from others harmed by a breach on your systems.
How fast can I get a quote?
Most clients receive a quote in under 24 hours after we review the details of their business and exposure.
What should I do first after a cyberattack?
Contact us right away. We help you start breach response, connect you with forensic and legal support, and guide your claim so you contain the damage quickly.
Insights
Field notes from the placement desk.
What carriers are asking right now.
Start a quote
Tell us about your business.
We’ll come back with terms.
We’ll review your stack, your contracts, and your exposure — then place the program against the right markets. Most intakes get indicative terms back within one business day.
01
Quick intake
We only ask what the carriers actually need.
02
Benchmark
Side-by-side terms from 10+ specialty cyber carriers.
03
Bind
Plain-language policy review, e-signed and in force.
